RCT TAB MX101M2

•        Important Note:  This product is fitted with batteries that are rated for 150-200 use cycles (charges & discharges). It is also advised that batteries are fully charged before the next use cycle, which can take up to 12 hours. Batteries should never be depleted below 50% of their capacity during a use cycle. This product is ideal for stage 1 & stage 2 load shedding. During constant stage 4 – 6 load shedding, battery performance may decrease within a few months so it is advisable to keep the product switched off during these heavy load shedding periods as a full recharge is not possible to achieve.

Please consider products with Lithium batteries that offer 2000+ use cycles and can be fully depleted during every use.

Batteries are not covered by the product warranty.

RCT MegaPower 1KVA/1000W Inverter Trolley With 1 x 100AH Battery

RCT MP-T1000S

Pure Sinewave for Sensitive Electronics & Motorized Loads
Microprocessor Control Optimizes Reliability
Input Power Factor Correction
Output Power Factor 1.0
Comprehensive Display Allows Easy Monitoring & Access of UPS Status
Built-in MPPT solar charger
2 x USB 5 V DC output and 2 x 12 V DC output
Battery cut off switch for safety
Pre-installed batteries

Specifications

RATED POWER: 1000 W
OUTPUT VOLTAGE: 220 VAC
OUTPUT FREQUENCY: 50 / 60 Hz
OUTPUT WAVEFORM: Pure Sine Wave

SOLAR INPUT
MAXIMUM PHOTOVOLTAIC
VOLTAGE (VDC): ? 25 V
CHARGE VOLTAGE (VDC): 10 V – 25 V
RATED CHARGE CURRENT (A): 30 A
MAXIMUM POWER (Wp): 360 Wp
VOLTAGE OVERCHARGE PROTECTION
(VDC): 14.2 V
VOLTAGE OVERCHARGE RECOVERY
(VDC): 14.0 V
VOLTAGE OF FLOATING CHARGE (VDC):
13.7 V

OUTPUT
AC OUTPUT:
2 x SA 3 Pin Socket – 230 V 50 Hz,
1000 VA / 1000 W Max. (Combined)
USB OUTPUT:
2 x USB Type A Port – 5 VDC 2 A Max.
DC OUTPUT:
2 x 12 V DC Port 2 A Max.
BATTERY TYPE:
1 x 12 DC 100 AH Deep Cycle
VRLA Gel Battery

Ports and Interfaces
1. AC Output
2. Smart Cooling Fan
3. AC Input
4. Solar PV Input
5. Battery Extension
6. Battery Switch
7. Led Indicator
8. LCD Display
9. Function Buttons
10. On / Off Buttons
11. 5VDC Output
12. 12VDC Output
13. DC Output Switch

What’s in the box

1 x RCT MP-T1000S

•      Important Note:  This product is fitted with batteries that are rated for 150-200 use cycles (charges & discharges). It is also advised that batteries are fully charged before the next use cycle, which can take up to 12 hours. Batteries should never be depleted below 50% of their capacity during a use cycle. This product is ideal for stage 1 & stage 2 load shedding. During constant stage 4 – 6 load shedding, battery performance may decrease within a few months so it is advisable to keep the product switched off during these heavy load shedding periods as a full recharge is not possible to achieve.

Please consider products with Lithium batteries that offer 2000+ use cycles and can be fully depleted during every use.

Batteries are not covered by the product warranty.

 Rct Megapower 2kva/2000w Inverter Trolley With 2 X 100ah Battery Rct Mp-T2000s

Pure Sinewave For Sensitive Electronics & Motorized Loads Microprocessor Control Optimizes Reliability Input Power Factor Correction Output Power Factor 1.0 Comprehensive Display Allows Easy Monitoring & Access Of Ups Status Built-In Mppt Solar Charger 2 X Usb 5 V Dc Output And 2 X 12 V Dc Output Battery Cut Off Switch For Safety Pre-Installed Batteries

Specifications Rated Power: 2000 W Output Voltage: 220 Vac Output Frequency: 50 / 60 Hz Output Waveform: Pure Sine Wave

Solar Input Maximum Photovoltaic Voltage (Vdc): ? 150 V Charge Voltage (Vdc): 35 V – 150 V Rated Charge Current (A): Mppt 30 A Maximum Power (Wp): 800 Wp Voltage Overcharge Protection (Vdc): 28.4 V Voltage Overcharge Recovery (Vdc): 28.0 V Voltage Of Floating Charge (Vdc): 27.4 V

Output Ac Output: 2 X Sa 3 Pin Socket – 230 V 50 Hz, 2000 Va / 2000 W Max. (Combined) Usb Output: 2 X Usb Type A Port – 5 Vdc 2 A Max. Dc Output: 2 X 12 V Dc Port 2 A Max. Battery Type: 1 X 12 Dc 100 Ah Deep Cycle Vrla Gel Battery

What’s in the box
1 x RCT MP-T2000S

• Pre-installed Batteries